QUEBEC HEAVY VEHICLE KNOWLEDGE TEST 03

As a commercial driver in Quebec, Canada, it is vital to understand and abide by the strict traffic rules that govern the transport industry.

Quebec Commercial Driver Test 03

1 / 30

If you doing a brake adjustment inspection, what is the sign that your brake(s) needs to be adjusted?

If pulling the slack adjuster requires considerable strength

If the push rod is coming out of the brake chamber

If the push road travel is more than 19mm

If the brakes on the same axle have identical push rod travel measurements

2 / 30

How often should you be checking your rearview mirrors?

For about 5-6 seconds straight every minute to get a full grasp of what is happening behind you

Before changing lanes to see if anyone is in your blind spots

Only to see if cargo is still secured

Quick glances every 10-12 seconds and to complete manoeuvres safely

3 / 30

Which of the following is not an appropriate use for the trailer hand brake?

To bring the semitrailer to a stop during the hitching process

As an alternative option if you want to reduce wear on the parking brake

To check that the semitrailer is properly hitched

To check that the service brakes of the trailer are working after being hitched

4 / 30

What does the acronym GVWR stand for?

Gear Valve Wear Resistance

Grid Voltage Wheel Rotation

Gross Vehicle Weight Rating

Gross Volume Weight Restriction

5 / 30

If you are making a turn in a heavy vehicle, when is the correct time to accelerate?

As you are about halfway through the intersection

Any time, as long as you have checked your rearview mirror and blind spots

As you enter the turn

As you come out of the turn

6 / 30

Why is it important for drivers to know about brake lag?

Air brake systems generally require longer stopping distance than hydraulic systems

Driver reaction time is longer with air brakes

Hydraulic brakes react less quickly than air brakes to the application of the brake pedal

Fluid in hydraulic brakes is compressed more easily than air

7 / 30

If the low pressure light comes on, indicating that your service brake system is failing, what should you do?

Pull the parking brake control out immediately

Find the best spot to pull over within the next 5km

Within a few seconds, choose somewhere safe to stop your vehicle

Flip the switch to activate the engine brakes, as these will stop the vehicle

8 / 30

What happens when the parking brake knob is pushed in?

Compressed air fills the brake chambers

Compressed air is released from the brake chambers

The air supply control is activated

The trailer brakes become clamped

9 / 30

What mechanism causes the vehicle to slow down in a drum brake system when the driver presses the brake pedal?

The S-cam drives a rod which causes a slack adjuster to make the brakes clamp

Air in the supply reservoirs is released, activating an air purifier

Two brake shoes covered with linings press against the drum

Air in the brake chambers is emptied, which squeezes strong return springs

10 / 30

If you are carrying a heavy load, why is it important to increase your stopping distance rather than increasing your braking power when bringing the vehicle to a stop?

To prevent the over-rotation of the S-cam

To prevent the brake chambers from filling with too much air

To prevent the brakes from overheating

To prevent the air pressure in the service reservoirs from dropping too low

11 / 30

What is the correct way to ensure you are following the vehicle in front at a safe distance:

Estimate the length of the vehicle you are trailing and ensure there are about four of those vehicle lengths in between you

Turn on your high beams and check that the vehicle in front is at least beyond the range of the beams

Leave one second for every three metres of your vehicle's length and count out the seconds using a stationary object at the side of the road

Get very close to the vehicle in front and then slowly apply the brakes and count to 4 seconds

12 / 30

What is an essential guideline to follow when negotiating a curve?

Avoid accelerating in curves

Avoid braking in curves

Change gears only after you enter the curve

Always look to the right when you are navigating a curve

13 / 30

Which of the following situations could prevent you from clearing an overpass even if your vehicle is shorter than the height indicated?

There is a heavy load inside your trailer

There is vehicle coming from the other direction

There is a sign indicating strong crosswinds in the area

There is a thick amount of packed snow on the roads

14 / 30

Retarders will:

Do the same thing as a runaway lane if your brakes fail

Automatically be operable

Work well in any gear

Slow down but not stop your vehicle

15 / 30

When the brake pedal has been applied, what happens immediately after compressed air pushes on the diaphragm of the brake chamber?

The S-cam is rotated

The brake shoes come into contact with the drum

The push rod is pushed

The brake shoes are pulled apart

16 / 30

The emergency brake will take over and bring the vehicle to a stop when the pressure in the service brakes drops below:

242 kPa

380 kPa

550 kPa

446 kPa

17 / 30

If an air compressor begins operating when the air pressure in the service reservoirs drops below 714 kPa, then the air compressor will stop filling them when the pressure reaches:

890 kPa

866 kPa

852 kPa

828 kPa

18 / 30

When is jackknifing most likely to occur?

When the brake linings are worn down

When the angle between the push rod and the slack adjuster is 90Â°

When the space between the brake lining and the brake drums is too large

When the anti-lock braking system comes into play because the driver is attempting to stop urgently

19 / 30

When entering a right curve in a heavy vehicle, the driver should:

Aim to keep the vehicle aligned in the centre of the lane

Keep the front of the vehicle closer to the centre line or the left side of the lane

Use his or her mirrors to monitor the path of the rear wheels

Keep the front of the vehicle closer to the right side of the road

20 / 30

Which of the sequences below correctly describes how air from the outside of the vehicle travels through the brake system?

Air compressor; air filter; supply reservoir; service reservoirs; brake chambers

Air filter; supply reservoir; service reservoirs; air compressor; brake chambers

Supply reservoir; service reservoirs; air compressor; brake chambers; air filter

Brake chambers; service reservoirs; supply reservoir; air filter; air compressor

21 / 30

Which of the following statements is true about the primary and secondary circuits of an air brake system?

The two circuits work independently

The two circuits work in synchronicity

One circuit cannot work without the other

The driver controls the two circuits separately

22 / 30

As a responsible driver, you should look ahead over the distance you will be covering in the next:

3-6 seconds

5-8 seconds

17-20 seconds

12-15 seconds

23 / 30

Which of the following is not one of the factors determining the braking power?

Rotation of the S-cam

Length of the slack adjuster

Radius of the brake shoes

Size of the diaphragm

24 / 30

What would two needles in an air pressure gauge indicate?

The minimum and maximum amount of air pressure that gets into the brake chambers when the brakes are applied

The amount of air pressure that gets into the brake chambers when the brakes are applied

The amount of air pressure in the service reservoirs for each of the circuits

The minimum and maximum air pressure in the service reservoirs

25 / 30

How is compressed air supplied to a semitrailer's reservoirs?

From the two service reservoirs of the truck or tractor

From the emergency reservoir

From the supply reservoir of the truck or tractor

From the compressor

26 / 30

Which is not a major factor contributing to 'brake fading'?

Continuous and unnecessary 'riding' of the brakes

Prolonged braking distance

Excessive force on the brake pedal

Improper brake adjustment

27 / 30

Air brake systems might operate at different pressure levels, but the difference in pressure between when the air compressor starts and stops operating is always the same. It is:

152 kPa

176 kPa

138 kPa

114 kPa

28 / 30

What does the air pressure gauge tell you?

How much compressed air pressure gets into the chambers when the brakes are applied

The difference in pressure between the two brake circuits

How much air pressure there is in the service reservoirs

The air pressure travelling via brake hoses between adjoining trailers

29 / 30

What is the purpose of an air purifier in an air brake system?

It reduces the time required to bleed the air reservoirs

It removes the need to bleed the air reservoirs

It makes the bleeding process more complicated

It reduces the frequency with which you need to bleed the air reservoirs

30 / 30

What is best practice for using your supplemental brakes when going down a hill with a loaded vehicle?

Ensure you are in the low gear range, flip the engine brake switch and take your foot off the accelerator

Upshift to the high gear range and flip the engine brake switch

Flip the engine brake switch and then apply constant force to the brake pedal

Apply a steady amount of force on the accelerator and then flip the engine brake switch

Your score is

Some of these rules include mandatory vehicle inspections, strict speed limits, and adherence to hours of service regulations. Commercial drivers must also have a Commercial Driver’s License (CDL) obtained after passing various tests to assess knowledge and skill levels. Commercial drivers need to be aware of the rules of the road, such as yielding to pedestrians, obeying traffic signals, and avoiding distracted driving. Ignoring these rules can have severe consequences, including fines, license suspensions, and even imprisonment in some cases. Furthermore, commercial drivers are subject to stricter blood-alcohol limits and may be required to undergo regular drug and alcohol testing to ensure safety on the road. By following such regulations, commercial drivers can help prevent accidents and injuries while operating their vehicles in Quebec.

To begin your career in commercial driving, you must obtain your Quebec Class 1, Class 2, Class 3, or Class 4 Heavy Vehicle Driver Licence.
These online practice tests were developed to help individuals study for their Heavy Vehicle driver’s licence. Our practice testing area is designed to help you learn the information on your actual written knowledge test and familiarize you with the testing format. All testing material is covered in official Quebec’s ‘Driving a Heavy Vehicle‘ manual.